Chord Company Banana plugs
Chord Company set of 4 banana plugs
The ideal after-market solution for the termination of any speaker cable.
Adaptable Chord z-plug design that will connect to all types of speaker and amplifier.
Easy to use. Cable can be secured to the plug using screw or solder.
Each kit contains: 4 x 4mm speaker plugs 2 x red covers & 2 x black covers
Direct gold-plated Copper beryllium contact
Can be used with both standard 4 mm and BFA type sockets
Twin fastening screws provide positive connection and strain relief.
Easy-fit plastic cover.
Compatible with all speaker cables
Fitting instructions for Chord Company Banana plugs
1. Most Chord Company speaker cables have an outer jacket that surrounds the insulated conductors. Approximately 150mm (6 inches) of this outer jacket should be removed from the end of the cable prior to fitting Chord screw-type speaker plugs.
2. Strip the end of each conductor so that approximately 8mm (3/8thinch) of bare conductor is exposed.
3. Unscrew both screws on the cable connector and push the bare cable into the socket at the rear of the plug . The screw nearest the gold-plated speaker connector should be screwed down on to the bare conductor and the second screw should be screwed down on to the insulation surrounding the conductor to provide a degree of strain relief.
4. The speaker plug is provided with a colour coded cap. These are simply screwed into place to provide easy identification of positive and negative speaker cables.